Posted by Darrin Johnson on January 12, 2009 at 19:34:46 from (75.173.208.96):
I have problems with the 3 point. when it gets to the selected height it drops +/- 1" then raises to the correct height and does this over and over at any selected height. New lift cylinder,new pump,new inlet filter,new fluid and still the same issue. I'm lost ? Is it the block valve under the seat ? or ? I have hydra-touch valves in a row, 2 with Dual/single cylinder adjustment pins and the one for the 3 point has no adjustment for dual/single but is connected to the draft control rod which works well and I don't think thats a draft control problem as it seems to respond well. HELP !!! Darrin at blower440@msn.com or 719-331-1759 colorado
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Proflie: John Deere Model R - by Staff. The John Deere Model R, the last of the lettered tractors, was the first diesel-powered tractor produced by John Deere with a gasoline starting engine. It was also the first tractor they produced that had an optional steel cab. The photo above shows the tractor w
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.