OK, let's slow down a bit. I'm at a bit of a disadvantage, because I don't use Vista.
You have confirmed that your files are in JPEG format, which is good. So they should be readable by other computers or the store's kiosk. The question is, why can't other computers read the files? Either there's a problem with your disk, or they don't recognize the file type.
The fact that Paint can't open the pictures may not mean anything. By default, Paint is installed without GIF and JPEG capability. Why, I don't know. And I don't recall how to add it in.
OK, do this: Load the CD into a computer that you say can't read the files. Open the CD in Windows Explorer. (You can do this by double-clicking on My Computer, then clicking on the CD drive.) Can you see any files on the disk? If you can't, then the disk is most likely bad and you'll need to burn a new one. (You may have to open a few folders to get down to the actual files.)
Now, if the computer can see the files, see what the extensions are of the files. That's the part of the file name that follows the "dot" or period. If you don't see an extension, then you have to turn them on. Go to Tools->Folder Options. Under the View tab, you should see an option called "Hide Extensions for known file types". Turn this option off.
If the files have extension ".JPG", pretty much any computer should be able to read them. But if they have the extension ".jpeg", it's likely that older PCs and picture kiosks won't recognize the file name, and the files will need to be renamed to work. Renaming is horrible in Windows Explorer, but can be done very easily in an MS-DOS window using the "rename" command. (e.g "rename *.jpeg *.JPG")
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tuning-Up Your Tractor: Plugs & Compression Testing - by Curtis Von Fange. The engine seems to run rough. In the exhaust you can hear an occasion 'poofing' sound like somethings not firing on all cylinders. Under loaded conditions the tractor seems to lack power and it belches black smoke out of the exhaust. For some reason it just doesn't want to start up without cranking and cranking the starter. All these conditions can be signals that your unit is in need of a tune up. Ok, so what is involved in a tune up? You say, swap plugs and file the points....now tha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
