Posted by DRL on February 20, 2009 at 18:36:32 from (24.32.125.199):
Meant to label my last post as 3020 not 2030. Got my wires crossed, I guess.
Working on a "67 3020 that has sat outside for about three years. Put a new fuel pump on it, bled the lines through the new fuel filters. Have new fuel up to the injector pump and fuel going back through the return line, but no fuel will go to the injectors themselves. It is like the throttle lever is in the stop position even though I have it at WOT. I have been told that this Roosa Master pump has a metering valve that is pushed closed when you pull the throttle lever to the stop position and I believe that the valve is stuck from sitting. Is there anything that could be done to fix this short of pulling the pump off and taking it to a repair shop? The pump was rebuilt about a year before the tractor was parked, so unless there is something damaged from sitting, it should be good and strong. Thanks in advance for your help.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.