Tractor Talk Discussion Board |
looking for cylinder for hough payloader
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Russ Hoyt on June 26, 2000 at 22:43:20 from (168.191.239.134):
I inherited a Hough Payloader model # HFG, serial # 86354. I am missing one of the two cylinders that raise the back hoe arm. Where the arm attaches to the back hoe it reads Wain-Roy (back hoe) Model # H200C, serial # H2C 375. The length of the arm is 42" and 4" wide. It has two eyes at either end with a diameter of 1 1/2 inches. I'm interested in obtaining a cylinder. If anyone has one or knows where I may obtain one please contact me via e-mail. I would also be interested if anyone can tell me what year this model is. Thank you
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|