Re: Re: Re: Movement in water pump pulley - any suggestions ??

Posted by ltf in nc on June 27, 2000 at 08:43:52 from (206.228.214.253):

In Reply to: Re: Re: Movement in water pump pulley - any suggestions ?? posted by Alberta Mike on June 26, 2000 at 21:22:06:

Bob Oh got you covered on the removal. Just cut yourself a thin paper washer to keep the excess from getting on the bearing. The paper will self destruct when you start the engine. As for tightening the nut, if you will install a flat washer between the pulley and the nut it should help you center the pulley to the shaft as the nut is tighten. It will work.

Follow Ups:

• Re: Re: Re: Re: Movement in water pump pulley - any suggestions ?? Bob Oh should have read Fred OH, SORRY 08:47:39 06/27/00 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Movement in water pump pulley - any suggestions ?? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]