|
Tractor Talk Discussion Board |
Re: Re: Re: Ford 600 Serial Numbers
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ahmed on July 10, 2000 at 04:41:06 from (193.188.81.71):
In Reply to: Re: Re: Ford 600 Serial Numbers posted by Lee on March 23, 1998 at 19:41:32:
:
: : : Help! : : : Don't panic, man! Those numbers you quote, are they stamped or cast? Sounds like you are reading casting numbers. The actual tractor serial number is stamped, not cast.
: : As Far As I Know, the serial number location on the 600-series was on the left side of the transmission housing to rear of starter motor on a semi-vertical flat spot.
: : Year of manufacture is easy-
: : Year serial #
: : 1954- 1
: : 1955- 10615
: : 1956- 77271
: : 1957- 116368 : : Dan : Dan, : Thanks for the response. The numbers I referred to were either immediately in front of or behind the running boards on the left and right side respectively. They do appear to be cast into the metal as opposed to "stamped" I will check them out and look for the serial number next to the starter area on the transmisison housing. Know of any good web sites where I can learn more about this machine?? : Cheers, : Lee
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
