Posted by I need a handle on March 09, 2009 at 17:51:04 from (72.92.147.147):
In Reply to: Got the wico on posted by Lanse on March 09, 2009 at 12:31:34:
Alright Lanse! That was quite the project to see through. I second an education. While there are a few that learned through simply playing with things, completing a whole curriculum is the way to go. That way you will not only cover everything you need to know, but also will have the piece of paper that proves that you know what you are doing. People won't take you very seriously if you don't have the "paper trail" to back up your claim of being a mechanic. The world is full of guys who do more damage than fixing with a box of tools who claim to be mechanics. The money with certification is often a lot better too!
If mechanics is your thing, then what people want fixed nowadays is modern vehicles, tractors, and machinery, mostly stuff that would be pretty hard to learn on your own. The good news is that what you have learned on these old tractors is a good start, but now you need to learn the rest of it. UTI might be of interest to you.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
