Posted by 200cs on March 27, 2009 at 06:13:42 from (38.99.215.182):
In Reply to: OT Ford F150 carb posted by Stockdale Dave on March 26, 2009 at 18:45:46:
A couple of thoughts:
If it runs fine after warming up, consider converting it to a mechanical choke. I had an old Quadrajet I did this to once to correct a similar problem. You can buy the kit from any big parts store although they may have to order it for you. And, you may have to fabricate a bracket here and there to get it working right but for 20 or 30 bucks it might be all you need.
If the carb is junk then go to www.summitracing.com and buy an aftermarket carb that is new and will work fine. I would even change the intake and convert it to a fourbarrell if it were mine. Edelbrock makes really good stuff that will bolt right up. good luck
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
