Re: Re: Re: 1947 farmall cub

Posted by Garnet Best on August 07, 2000 at 13:46:18 from (142.177.86.10):

In Reply to: Re: Re: 1947 farmall cub posted by Jim Englar on July 30, 2000 at 21:21:39:

Sure you can add the hydraulics to a 47 Cub if you want to throw enough money at it. There should be a cover bolted to the lower left of the engine in front of, slightly below and inboard of the carb. That is where the live pump goes. So you need a pump, a hyd. box (which contains the hyd. resevoir, lift arms, cylinder and valve)connecting tubes from/to pump and the touch control assy. If you want to add an external cylinder (such as loader) you will also need the adapter between the hyd. tubes and the hyd. box box. Good luck with a source. Possibly a later parts Cub or one of the used parts sources.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: 1947 farmall cub Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]