Posted by Ray Heck on April 20, 2009 at 16:57:59 from (75.179.164.255):
On Sunday April 19, 2009 my wife and I attended the plow day for the Morrow County Antique Tractor & Equipment Assoc Inc. It started at 9am, but we did not arrive until 11am. The club did a great job putting up signs for directions to the farm where it was held. Since we were not familiar with the area this was a big help. Also, there was a bucket loader available to lift the plow of and on the trailer. This makes things much easier. I started plowing shortly after we unloaded. This was our second plow day in two days, but this was only about 45 minutes from our house. We used the same tractor that we used on Saturday. The tractor is a 1946 Massey Harris 81 RC and Moline steel wheeled plow with two (14")bottoms. I had been plowing for about an hour; then lunch was served. Nice lunch and then some time was spent talking to old and new friends. Then I returned to plowing until about 2:30pm when I stopped because of other commitments. We had a great time and enjoyed plowing myself and watching others plow. Great variety for tractors and plows were there to watch. Also got some good adice on some adjustments that i need to make on my plow. Thanks to the club and the property owners.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
