Re: coolant leak

Posted by Gman on September 14, 2000 at 02:01:10 from (207.86.240.84):

In Reply to: coolant leak posted by Bill Scott on September 12, 2000 at 18:27:04:

Bill I saw your post earlier,though,and though if you don't want to tear it down again go to the Parts house and get you a couple of jars of copper coolant sealer,drain anti-freese and put in plain water bring engine up to temp or warm and add copper sealer run engine about halve an hour let set for a while and drain and put anti-freeze back in. I know this is on the verge of cobbling but you need to keep that antifreeze out of the cylinders. The only other choice you have is to tear engine down and magna-flux head and block. Gman

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: coolant leak Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]