Re: Crank journal rust...

Posted by Z-bar on September 24, 2000 at 21:49:16 from (204.254.215.134):

In Reply to: Crank journal rust... posted by Gary on September 24, 2000 at 21:06:54:

Gary, If it was mine, I would pull it from the block and take it to a good machine shop. It may already be some what under size, the mains also. The machine shop could mike it and you could go from there. I have taken some real sorry looking cranks to the shop and after cleaning and some polishing and some more cleaning, they were alright to put back in. Some small pits wont hurt anything, out of round is what wont work. luck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Crank journal rust... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]