Just a slight cut on the back of my hand, from reaching under the shielding on a small engine to adjust something. The edges of the sheilding are usually pretty benign, but those corners will get ya!
Took the loader tractor over to a friend's place to lift rotten timbers out so he can rebuild a bridge over a small creek. No injuries there, although there were plenty of opportunities! Funny to watch a guy who isn't used to having a loader tractor to do the heavy work- He's trying to pull the chain out from under a heavy timber after lowering it onto the ground- "No, Fred- we've got a tractor- We just lift the loader, and the chain comes out!" Then he's trying to push the timbers together to bunch up the pile- "Fred, let me just push them together with this handy loader thingee we have here."
I had volunteered for the job (took all of a half hour), but he didn't want to "put me out", so he had called some contractors- got a real education there! One wanted to make sure we had all the permits in place (Fisheries, Army Corp, Ecology, on and on), and would have to install a net over the creek so no debris would fall in. Another would do it for $125 per hour, 4 hour minimum. I charged him breakfast.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
