Posted by Rick from NC on June 01, 2009 at 15:58:40 from (75.143.189.87):
In Reply to: Ford I9-528 Loader posted by Jeff_ford on June 01, 2009 at 15:35:57:
Loader is a Model 730. You can buy manuals for the tractor & loader on this site. You can also check New Holland Technical publications. They aren't too high on some manuals but on others they are outrageous.
The cylinders aren't normally rebuildable but some cut them apart and replace the worn items and weld them back together. There are two versions: 1/2" rod and 5/8" rod. You may want to upgrade to the 5/8" rod with the loader. I think they are about $200 each.
You should also know the front end of a 2000 is fairly light duty for a loader though many are used as loader tractors. You might want to check the front axle for wear before doing much heavy lifting.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
