Rick: I own and have used both a 42" and a 30" on a 3-point for both B&B'ing and direct transplanting. IMHO, any B&B work is a 2-man job. It seems to work best to hold the basket with burlap up to the blades and then set the ball on the ground so it is just resting; then pull the blades up. Getting the ball centered in the basket will help with its standability, as well as its final look. Basket selection can affect their 'standability'. The larger baskets will have a larger bottom and stand better. As far as 3-pt. vs. skid steer you will gain much in manuverability in close quarters, if your rows or trees are close together, etc. with the skid steer. My unit is about 25 feet long with a water tank on the front for counter-weight. The main drawback with the skid steer will be in digging in wet conditions. The tractor tires will give much better flotation than any skid steer. If you want to keep your sod, you will need rubber tracks on the skid steer. Plain tires and/or steel tracks will rip up faster sod than you can fix it. Don't ask me how I know.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
