Posted by alabamafrog on June 24, 2009 at 11:40:33 from (68.117.248.60):
In Reply to: O/T my new truck posted by Nancy Howell on June 23, 2009 at 20:09:11:
Glad you got a powerstroke, my truck was my hobby before I got into the JD’s. Below is my signature on the powerstroke forums with my truck mods. If you ever need any help with it I can point you in the right place. I’m not much on the 94-97’s but lots of stuff is similar to 99-03 and I know folks who are familiar with them.
My advice would be to check the air intake, if it has the factory severe duty intake then your okay, just keep it clean and watch for dust leaks. If it doesn’t have the special intake then do a DIY intake for about $40. The regular factory intake can and will leak dust and a new engine can cost around $10,000, it cost me $4,000 just for parts to rebuild mine.
Advice number to is to get gauges, at least a tranny temp gauge and don’t let the tranny get over 180*. Most likely you will need to add a second cooler. I like the Trucool 40K, its about $120. If you keep it cool the tranny will last, if not it will fry over time, especially if you tow with it.
Clean fuel is important too, those injectors are around $250 each.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Corn in Southern Wisconsin: The Early Years - by Pat Browning. In this area of Wisconsin, most crops are raised to support livestock production or dairy herds in various forms. Corn products were harvested for grain, and for ensilage (we always just called it 'silage'). Silo Filling Time On dairy farms back in the 30's and into the first half of the 40's, making of corn silage was done with horses pulling a corn binder producing tied bundles of fresh, sweet-smelling corn plants, nice green leaves with ear; the
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
