Re: wet Sleeve

Posted by twopop on October 25, 2000 at 06:53:42 from (208.224.41.112):

In Reply to: wet Sleeve posted by Dan on October 24, 2000 at 17:41:33:

the mh 35 is a dry sleeve engine.the sleeves are thin and can be torn easily.i use a small rounded off screwdriver,and from the bottom of the block,tap the screwdriver between the block and sleeve ,the sleeve will tear,keep tapping until the sleeve is torn all the way to the top.remove any sharp edges from the screwdriver

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: wet Sleeve Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]