Tractor Talk Discussion Board |
Re: What is reasonable?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Pete on October 25, 2000 at 17:20:52 from (4.48.23.179):
In Reply to: What is reasonable? posted by Jim on October 25, 2000 at 11:44:47:
Hi Jim, I owned a few, and worked on several IH Cubs as well as other makes too. Keep in mind that looks on the outside are just that. Make sure that you thoroughly inspect this little guy before you make an offer. Also, keeping mind that the market for old tractors varies by geographic location. For instance, small tractors seem to be really popular in the New England states, but have significantly less popularity in other areas where large farming is more prevalent. If your description is accurate you should be prepared to spend considerable time as well as money to bring this tractor to a decent show quality. If it were me, no more than 600 if running, and 200 if not. Hope I helped, and good luck!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|