Posted by ericlb on June 26, 2009 at 19:14:02 from (12.189.32.38):
ok after seeing your pic's thats what i thought you had, now for a test, the normal way to fill a loader bucket, is; approach the pile to be moved, when at the front, lower the bucket make sure the cutting edge is flat on the ground, but not so hard as to cause the drive tires to lift, it just needs to rest there, then in 1st gear move into the pile, as soon as you feel resistance lift slightly on the bucket, you'll feel the tractor "sink" a little , this loades the drive tires making it harder for them to spin, then start to curl the bucket back as you continue to lift, to get as much material as possible in the bucket, this will take some practice, a full day at least,so dont get discouraged, you have to develop a 'feel' for the machine, let us know how you are progressing, after you can do this fairly well let us know how the machine is working, also dont expect a full bucket every time, you wont be able to get it unless the material is very loose, when i use the loaders at the pit i dont always get a full bucket if im digging on a hard face, and im using 500 horsepower to dig with, hope this helps eric
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Show Coverage: Journey to Ankeny - by Cindy Ladage. We left Illinois on the first day of July and headed north and west for Ankeny, Iowa. Minus two kids, we traveled light with only the youngest in tow. As long as a pool was at the end of our destination she was easy to please unlike the other two who have a multitude of requirements to travel with mom and dad. Amana Colonies served as a respite where we ate a family style lunch that sustained us with more food than could reasonably fit into our ample physiques. The show at Ankeny
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.