Lance I have a world of info on that engine including wiring diagrams, but as wired on the Bolens the wiring you have relates to the Bolens as far as the missing safety switches,
as far as just getting it to run there should be a 2 wire plug thingy coming out from under shroud [top cover] it is a white plastic with two holes to plug in wires with a bullet style male plug~~~~ Now listen!! ~~~ Feel the wires just behind the white plug and the wire that has a small lump is the charging wire that goes to the amp gauge. and is for DC voltage the other is AC for lights.
you will need a [+} hot wire to the can thingy on the side of the carb either from the ignition switch or a toggle switch This is a magnetic fuel shut off when power is not present and a one time clicking sound should be heard when ignition is turned on. at this point should run the way you are trying , but I suggest you place the hot [+] on the starter and use ground away from the tank somewhere on frame or front of motor. By the way that is an Opposing twin briggs. post serial, model, and code numbers and I'll try to find the actual wiring diagram.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
