Re: Re: RESTORING TIE-ROD ENDS AND SUCH

Posted by Jon Hagen on November 03, 2000 at 11:06:01 from (63.160.194.244):

In Reply to: Re: RESTORING TIE-ROD ENDS AND SUCH posted by Truck on November 03, 2000 at 05:21:12:

I got 4 of those tie rod end repair kits 10+ years ago to repair the worn out tie rod ends on my Big mo 400 Moline used 2 and have 2 more on the shelf for when the other two joints wear out.
I got them from a outfit in Wisconson. The name was burwiss or bur-wis?. The kit consists of a steel cage to fit over the old tie rod end with a big adjustment screw like the old tractor tie rods had+ an assortment of white plastic/nylon ? washers and cups,springs to fill in the worn area. The things seem to work well, have not had to readjust them to take up wear. I looked at the spare ones this morning, but no name, address , PH# on the box or instructions.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: RESTORING TIE-ROD ENDS AND SUCH Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]