Tractor Talk Discussion Board |
Re: Re: 3-point hitch -- category 2 vs category 1
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by paul on November 13, 2000 at 19:22:46 from (216.161.109.15):
In Reply to: Re: 3-point hitch -- category 2 vs category 1 posted by Kermit on November 13, 2000 at 18:50:42:
You will find a dizzy array of bushings at the farm store. The top link bushing is different than the bottom 2, but if you keep looking you'll find it, if you just want the 3 bushings. I would not run with the 'slop' on the pins, that's just asking for problems. As another person said, cat 2 hitches are generally on bigger tractors, so you might overstress your implement with the more hp, but otherwise there are no specific safety problems. Well, cat 2 might have longer arms, lift higher, and so forth. Watch any pto equipment so it doesn't mess up the pto. And cat 2 normally is wider, so you might need a different set of stablizer arms, if you need stabilizers on whatever you are using. --->Paul
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: What's The "Stuckest" You've Ever Been? - by Edited by Kim Pratt. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I was about 14 (part of the problem) when I got stuck. I was disking with a cab equipped IH 966. The window was dirty and I was driving into the evening sun. It was hard to see and it was my first pass down the field. I got the tractor so stuck that the underside of the tractor was resting on the ground. My uncle wanted
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|