Tractor Talk Discussion Board |
Re: Re: indian motorcycle
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jon Hagen on December 11, 2000 at 00:53:57 from (63.160.195.227):
In Reply to: Re: indian motorcycle posted by Alberta Mike on December 10, 2000 at 19:21:07:
I had a 36 Harley with the hand oil pump.About 35 years ago I traded my 47 Ford coupe to the local blacksmith/welder/repairman/junk collector for this old Harley, which he actually did buy out of a farmers barn near Rugby ND, where it sat unused for many years. This was the old flathead 80 CI model, painted black without a single bit of chrome or nickle plate. I got it running and used it for a year or so, and finally traded it for a 48 knuckle head Harley 74. The 36 had an oil tank built into the gas tank with a hand pump sticking out of the top of the oil tank. The way the thing worked is that the hand pump would fill the engine until oil would overflow from the breather onto the primary chain then to the secondary chain for kind of an automatic oil change and chain oiler.If I remember right the hand pump was only for the initial fill and maybe one shot when you first started it.There was another smaller pump attached to the throttle which would add another spurt of oil every time you worked the throttle.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|