Posted by Guy Reed on September 20, 2009 at 10:53:13 from (216.75.124.10):
In Reply to: Broken Cast posted by PF on September 18, 2009 at 17:34:02:
Good day Sir, You asked the question "what is the best way to repair cast iron"? I would have to say for your situation I woud braze. DO NOT ARC WELD YOUR CASTING!!!!! UNLESS YOU CAN HEAT IT TO 1800 DEGREES. When arc welding cast iron you are attempting to fusion weld it and fusion welding of cast iron requires it to be at the proper temp. Brazing is different, you are not trying to melt the base metal. And just so that you are properly informed, yellow brass or low fuming bronze has a tinsel strength of 65000 psi. and grey iron has a tinsel strength of between 20000 and 40000 psi. So if you prepare the surfaces and if necessary pre-heat properly you will have a part that is as strong as new. If you would like to call me I will be glad to assist you in any way I can. If you could send me a picture that would surely help. Please take a minute to visit my web site. Thank you
Guy Reed Owner Industrial Casting and Gear 2845 co. rd. 160 Albin Wy. 82050 (309) 275-1046
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
