Tractor Talk Discussion Board |
Re: The continuing saga of the Cold GMC Tractor Hauler...
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by T_Bone on December 30, 2000 at 05:04:04 from (207.254.53.52):
In Reply to: The continuing saga of the Cold GMC Tractor Hauler... posted by Truck on December 29, 2000 at 13:42:48:
Hi Truck, You have a partial plugged heater core. At high rpm you force enough hot fluid thru the heater core to heat, but at low rpm you don't have enough flow thru the heater coil becuse the pump is pumping less at low rpm. Your deceleration is the same as low rpm. Also make sure your hot supply line to the heater coil is feeding the top of the heater coil and returning at the bottom outlet. This time of the year if you don't have a heated work space, you might consider getting a gallon of flush (theres is more concentrated) from your local radaitor repair shop, unhook both lines from the heater core and install a circulating pump on the heater core lines to keep from tearing the dash apart. A swamp cooler pump is cheap and works great. T_Bone
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|