Tractor Talk Discussion Board |
Re: Re: Ferguson TO-35 Lift
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by GEO on January 16, 2001 at 19:58:34 from (63.104.132.103):
In Reply to: Re: Ferguson TO-35 Lift posted by Lazyhorse on January 16, 2001 at 15:26:36:
The TO-35 did have a live PTO if the tractor had the usual 6 speed transmission. At least all the one that I have traded for and or bought did. As for the lift problem. There is a plate on top of the lift quadraunt just to the right under the seat that is held on with two bolts. There is a tube underneath this plate that has orings on it. Pull tube out and replace orings. Be careful when reinserting it, not to miss the hole in the bottom. If there is no change in problem, then the next step is to check pump relief valve. Replace this valve if it is bypassing. This valve can be changed out through the right side cover. The control valve are also known to wear alot due to the constant rocking motion from the pump. Be sure the transmission fluid is 90 wt mineral or at least 80/90 GL-4 or GL-5 oil. Current type hydraulic transmission fluid won't work very well in these older tractors unless you are in very cold climate.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|