Posted by Bob on October 26, 2009 at 19:26:10 from (69.178.228.68):
In Reply to: Re: John deere 7520 posted by 4010guy on October 26, 2009 at 18:45:29:
Early newGen guy,
Well, it's like this... folks that know me know that I'm (for the most part) josh'in him, and I would expect someone to do the same to me if I make a blatant misstatement..
On the other hand, random, non-researched posts like his really tick me off. Some day someone will see that in the archives and accept it as the gospel truth. That's why I feel it's IMPORTANT that misstatements be corrected. Yes, I've made LOTS of mistakes around here, and I've tried to fess up to EVERY one I've ever been "called" on.
Better to do that and have the record "corrected" than to have untrue information saved in the archives to confuse someone in the future.
Who knows, here, maybe I'm the one who's WRONG, but, before replying, I DID take nearly a half an hour to look at the parts book at jdparts.com AND dig out the shop manual to see if there WAS a version of the 7520 with live PTO. I came up empty-handed.
If someone can point out that there WAS a factory US version of the 7520 of that era WITH live PTO I'll (gladly) publicly "eat crow"!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
