Tractor Talk Discussion Board |
Re: IH 400 stuck engine
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wade on January 24, 2001 at 22:37:08 from (209.86.48.239):
In Reply to: IH 400 stuck engine posted by van on January 22, 2001 at 10:17:26:
Here's the quick and risky way. Shoot a little juice in the cylinders (name your poison). Fill the crankase with diesel. Leave the plugs out, hook a chain to it and pull it. Engage a high gear every now and again. Hang on. When it breaks loose let it turn many times. Refill with oil. Get fuel and spark. Hope you didn't bend/break anything. I haven't actually done it, but would if the engine weren't especially valuable. ALSO If you have the head off forget beating on a piece of wood until you've applied heat. A bit of fuel in the hole and a match works wonders. I know this to work on D4 Caterpillar.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|