Posted by F150Mustang on November 19, 2009 at 08:01:19 from (216.161.101.231):
In Reply to: Some plow day questions. posted by Minnie Mo John 2 on November 19, 2009 at 06:14:21:
Ive hosted a plow day at our farm for the last few years. It started because our club only has a few acres avaible to plow during the show. I host mine in the fall after the beans are out and on a sunday afternoon. The club does not sponsor it but a bunch of members show up for it. I cant say for all but here all are welcome and there is alot of knowlege around that day and can help you get your tractor and plow working good. My biggest problem is when someone pulls a old plow out of the weeds and shows up thinking its gonna work. You have to spend some time in a shop sanding rust off the moldboards first BEFORE you put it in the ground. Yes some tractors move faster than others (sometimes showing off) but we never have had a problem. We really arnt trying to get anyreal field work done but just having fun. Somebody always runs of gas, gets stuck or their tractor dies and has to be pushed onto a truck. We usually strike about 3 lands and let people go where they want, kinda spreads them out and keeps them out of each others way. We have no competitions its just a day to play. Hopefully this sunday we will be having it again, kinda late but the weather hasnt been good. A good question to ask before you haul a plow very far is weather or not they have a loader there to load and unload a plow. Good luck and have fun!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
