Tractor Talk Discussion Board |
Re: Avery Rear End and Tranny Oil - 30 weight engine oil ???
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Al English on February 05, 2001 at 19:32:43 from (24.30.29.47):
In Reply to: Avery Rear End and Tranny Oil - 30 weight engine oil ??? posted by Alberta Mike on February 05, 2001 at 18:18:10:
I used to work on imported cars that required motor oil in the transmission. Occasionally a car would come in that someone had put 90wt gear lube "transmission oil" in the transmission. I've never understood why, but the gear lube would cause the bronze bushings ,syncro rings, and shift forks to wear almost like they had no oil at all. At the same time, there are many other transmissions that also have bronze parts, use 90wt gear lube, and live a long happy life. It must have to do with the particular alloy of bronze used. Machine tools and industrial equipment(especially older units) often specify heavy weight, non-gear lube types of oils. I'm told that using gear lube in these units has the same effect I've observed in the car transmissions. That being the case, I would use the type of lube specified by the manufacturer unless someone can PROVE to you that something else is better. The motor oil being made today is many times better that what was available whan most of our tractors were new. So if motor oil was up to the job when your tractor was new, it is going to do an even better job today. The heavy motor oil you need is a standard item for older Harley-Davidson motor cycles(old equipment again), so it isn't too hard to find. Maybe a mulit-weight oil would eliminate the need to change oil for each season of the year? Hope this answeres your question....Al English
Follow Ups:
Home
| Forums
Today's Featured Article -
Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|