Posted by Ecnerwal on December 19, 2009 at 10:03:51 from (71.161.145.119):
In Reply to: Tractor to forklift posted by Brad_bb on December 19, 2009 at 06:27:09:
The real RT forks (ie, Lull) are not very amenable to converting from anything else. They are quite versatile and very spendy. The ability to reach with them is extremely useful on a jobsite.
The ones you are talking about (I think) with a normal fork tower on the back of a tractor can drive over rough terrain, but still have to get very close to where you want the item picked up or dropped off.
Another option is to put real forks (not add-on-the-front-of-the-bucket forks) on an industrial loader. Front-of-the-bucket forks are limited because they are much further out from the pivot, so they cannot pick up as much as forks mounted in place of the bucket.
Fork lift ratings are usually for a load centered on the middle of the standard-length fork - ie, if supplied stock with 46 inch forks, load rating is usually for center of gravity of the load at 23 inches out the forks. If picking up 4 foot pallets, that generally won't quite be true, so picking to the max rating is not a great plan - it usually isn't anyway. For beams, you can get a lot closer to the pivot, and pick more.
I suspect a crane would be a lot more use for timberframing than a forklift.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
