Posted by chris Jones on December 27, 2009 at 13:34:24 from (98.26.240.6):
This message is a reply to an archived post by PatCT on September 24, 2009 at 13:07:54. The original subject was "Best way to disable a tractor".
One thought for combating winching them onto rollbacks or trailers is to leave a lowered, heavy and implement on it. Large plow or disk harrow for instance. It can be part of the Christmas decoration. Without it running to use the hydraulics it can be pretty hard to remove the implements and pretty hard to winch in with them still attached. Of course don't make it convenient to get a truck to it either.
Another thought comes to mind if we're talking a large tractor with power steering leave it with the wheels turned all the way one right or left. Hard to winch a tractor that's trying to turn. Assuming of course that they are like those I've seen in that they don't steer manually.
Lastly for the sneaky guys that carry plug wires with them an try to fix things. Put one of those rubber snakes on top the engine. Might make them think twice.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
