Re: 1950 case vac

Posted by Craig on March 06, 2001 at 13:24:06 from (163.188.56.155):

In Reply to: 1950 case vac posted by Don on March 06, 2001 at 12:44:29:

A VAC will pull a 2-bottom 14" plow. The later Vac's all tuned up and in flat loose soil would pull a 3 (??) or last a 2 bottom in 3rd gear. I have plowed with a later model VAC after we reworked the engine and she was running really well and it pulled the 2-bottom plow and we wondered what she would have done with a three.

But 90% of my plowing days were sent in 2nd gear and 1 St gear and working hard to keep the plow in the ground pulling up hill on clay hills.

I would buy a 2-bottom plow. If you want a 3-plow tractor you need a DC.

The case eagle hitch hooks up to most 3-point stuff. You may need to wire your latches down. Or make some minor changes to size of pins etc..

Follow Ups:

• Re: Re: 1950 case vac Don 14:51:16 03/06/01 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 1950 case vac Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]