Tractor Talk Discussion Board |
Re: Re: Which Tractor is right for me?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by paul on March 14, 2001 at 19:09:47 from (209.181.177.181):
In Reply to: Re: Which Tractor is right for me? posted by Marc on March 14, 2001 at 11:20:29:
Just keep asking. :) This is kind of like buying your first car - there is no perfect answer. Too many models, just try to narrow it down to a manageable field. This question comes up a lot, if you search through the archives here you will find answers that will help you. As to old tractors, those 1940 to 1970 model machines that are still running are very tough machines. They were built to take a lot of abuse, and to be worked on by the owner. They were designed to handle poor fuel standards, run slow rpm's, and pull pretty good for their hp. Most any of them can have the engine rebuilt for $2000 or less, less if you do the work. This can be done every decade or 2 if you really use the tractor a lot, I doubt you would. The regular manual transmissions on most of this era are indestructable, way over-engineered. (Farmall/International TA trannies cost $500 to rebuild - need to every once in a while, and Ford SOS trannies (automatic) were good, but have 3 times the parts so are very spendy to rebuild.) So, if you buy an old tractor in good working order now, you can plan on taking the starter & generator to NAPA once or twice, and probably one engine rebuild in your lifetime. Maybe a tie-rod end or hydraulic pump repair. Tires. That's about it. They are built tough. You can buy a cheap beater & stick money in it early, or pay more for a solid one now & rebuild in a decade or more. The Kubota is a good machine tho, don't think I'm steering you away from it. It might have more comforts, features, & safty on it that you want? --->Paul
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|