Re: hydraulic oil separation

Posted by souNdguy on June 05, 2007 at 11:32:46 from (12.64.102.221):

In Reply to: hydraulic oil separation posted by DANN G on June 05, 2007 at 10:23:42:

I agree with the others.. that oil is soaked.. get rid of it.

Run a bottle of seafoam transtune in your system.. it's good at dewatering when you drain/flush the system with fresh oil.

5g of oil is cheap compaired to a shelled out hyd pump that is cavitating cause the vapor pressure of the oil-water emulsion you are running is very low compaired to the oil alone..
Not to mention that emulsion has less lubricating qualities.. can boil, and can cause rust / pitting if it settles into areas of the hyds that aren't readilly drained..

Soundguy

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]