Posted by TuBit on April 15, 1998 at 08:52:03:
In Reply to: Tune up mistake posted by Bill Watson on April 15, 1998 at 06:28:12:
: I did a little shade tree tune up and now my 12 volt converted 9N gets no fire to the plugs. I used a Tisco #309786 tune up kit (plugs, points, condenser, rotor, gaskets) and also replaced the cap and plug wires.
: Expecting the grey beauty to fire right up, imagine my disappointment. Don't know what I did wrong but have a few questions in thet direction.
: 1. If the condenser is for 6 volt (is that possible) would that result in no fire.
: 2. What is the firing order? I marked the wires but may have screwed up. My 14 month old son was "helping" me and my wife was offering advice as well. I have it wired 1234 front to back.
: Any suggestions would be very helpful.
Check your firing order: 1-2-3-4 does not sound logical, I'll bet it should be 1-2-4-3.