Posted by Billy NY on March 02, 2010 at 13:56:09 from (74.67.3.238):
In Reply to: Who has horses??? posted by dave2 on March 02, 2010 at 13:12:09:
We just got another one in, think there is 14 now. We use steel wire and have a few Zareba solar powered fence chargers at the place. I liked the old weed burner ones we used to have when I was a kid, nothing like a hot fence that will throw you if you cross the strands, don't ask how I know LOL !
I think it is important to strategically locate the wire strands, you need good splices, less or none is better, a good ground, copper clad rod into soil that has enough moisture.
The nylon tape with the strands in it, we have used that off a regular charger, but I am not all that confident as to how hot you can make those, they seemed marginal to me, but I really don't know much about them. They seemed to be hot enough sometimes but I think there were splices and damaged areas of it, brush against it, been awhile since we've had any of that powered up.
We have mostly wood post and rail fences, though 2 of our smaller pastures are fenced like that, we ran 2 strands of the steel galv. wire, and employed 1 zareba unit to power both, they are hot enough to keep em off the fences, though most of these horses are seemingly well mannered, nothing like a little education from that fence if they go near it. I'd not trust any stallion when mares are in heat, these guys jump for a living so we try and coordinate turnouts carefully.
I dunno, I'd want some wire strand located where she will learn from it, darned horses always seem to find a way though don't they ? We got a new prospect in from another farm, first thing this gelding did was walk across the ice, and jumps 2 fences in one leap, 1 was electrified, I guess he wanted to introduce himself to the well mannered stallion we have, I was working on the roof framing of a barn that partially collapsed last spring from snow and saw him do it, well he's got good instinct and the stallion seemed to give him his approval, was so hard to believe that whole situation did not turn into something worse, as more times than not they find trouble.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: 1964 JD 2010 Dsl - Part 2 - by Jim Nielsen. Despite having to disassemble the majority of my John Deere 2010's diesel engine, I was still hopeful I could leave the engine-complete with crankshaft and camshaft-in the tractor. This would make the whole engine rebuild job much easier-and much less expensive! I soon found however, that the #4 conrod bearing had disintegrated, taking with it chunks of the crankshaft journal. As a resul
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
