Tractor Talk Discussion Board |
Re: Why a wheatland tractor for wheat?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Green Envy on April 22, 2001 at 14:12:35 from (216.220.8.51):
In Reply to: Why a wheatland tractor for wheat? posted by Poppinjohnny@aol.com on April 22, 2001 at 11:41:06:
We don't get as much moisture out here in Montana as opposed to the corn belt. As a result farms have to be bigger than they do where you live. Out here a farmer wouldn't take a JD 70 at all. Instead he would take the John Deere 80 which has more hp. A farmer out here would take a standard over a rowcrop for various reasons. We don't need adjustable tall rear wheels and the ground clearance for growing wheat and barly. Also, standard tread tractors are more stable in the hills than rowcrop tractors and are not as likely to tip over. I have never seen a standard tread 70 out here but there were alot of R/80/820/830 out here. During the 50s when you guys where farming with the John Deere 70/60/50 and similar size tractors, we were farming with International TD-14 and 18s, Catepillar D7 and D6 crawlers pulling 20ft to 40ft chisel plows. 200/300 hp 4-wheel Wagner tractors were also popular out here. However we did use rowcrop tractors out here. Most had loaders mounted on them like our Farmall M that has a Farmhand and they were used for putting up hay. Most tractor collectors out here view rowcrop tractors with tricycle front ends as more collectable than standard tread tractors. To sum it up, why buy a rowcrop tractor when all you will ever farm with it is wheat and other small grains instead of soybeans and corn.
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|