Posted by GeneMO on March 16, 2010 at 18:14:06 from (216.74.193.175):
In Reply to: Tumble bug scraper posted by Duane Wells on March 16, 2010 at 17:53:18:
I've got one down in the scrap pile. We used to pull it with an H Farmall. It's kinda hard to explain if you never saw one work.
Imagine a drum about half again bigger than a 55 gallon drum. With it laying on its side, cut a rectangular chunk out of the side that is about 1/3 of the drum. Leave the two end intact. Then along one edge of the rectangular slot, attatch a section of grader blade. Now on each end fashion a Pin sticking right out of the center. This attatches to a yolk that becomes the hitch.
There is catch system that will lock the drum in place, or when you trip it let it tumble.
You trip it so it starts digging, it will fill with dirt then roll over to the transport position (notched side up so the dirt doesn't fall out). You then drive to wherever you want to dump the soil, pull the rope that releases the catch and it tumbles over and dumps the soil out the slot.
That is about the best I can do.
You might search You tube and find a video of one working.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Farmall M - by Staff. H so that mountable implements were interchaneable. The Farmall M was most popular with large-acreage row-crop farmers. It was powered by either a high-compression gas engine or a distillate version with lower compression. Options included the Lift-All hydraulic system, a belt pulley, PTO, rubber tires, starter, lights and a swinging drawbar. It could be ordered in the high-crop, wide-front or tricycle configurations. The high-crop version was called a Model MV.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
