Posted by gbs on April 04, 2010 at 18:57:53 from (38.103.85.75):
i'm having a problem with a john blue 4400 series piston sprayer pump,i rebuilt it last season due to leaking oil seals, i installed new connecting rod and complete seal kit. i could not calibrate it with the slide rule used for this pump, so i used the ounces per nozzle delivered in 1/10 acre travel distance, set it at 20 gpa worked fine until this year, i wanted to apply 30 gpa ,i set the pump to deliver 32 ounces per nozzle, 12 nozzles on the booms spraying a 36 foot swath 121 feet long,at jogging speed we would catch 32 ounces per nozzle in a measuring cup ,the first i sprayed i got 23 gpa, my question is what could be the problem i've rechecked all my measurements there ok, still don't understand why this pump can't be calibrated with the slide rule, thanks for any help.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
