YES IT WILL. We set up a data logger to measure wind speed for a month. A short period, but we are smart enough to realize the wind charateristics in our area,related to season of testing,once we have a 30day data base. We logged consistant winds of 20MPH on this sight 50% of the test period and gusts up to 82MPH. Also had some days when the wind didn't amount to diddly sh!t. Also analized two locations on this site, and determined that although one location was 200' closer to the connection point, production would be far better Farther away and higher up on the property. We also weigh estimated production against anual consumption and make recomendations for energy conservation also. Mannnny variables to consider when figuring payback period. You must also consider your reason for installing renewable energy equipment, FINANCIAL or ENVIROMENTAL (to each his own) You might find this strange, but most of my customers are retired, and may never see a payback in their lifetime, but they don't take the cost of living and our impact on the enviroment for granted, like todays generation does. If you are my age you can think back when!!, and if I had done this!, I would be further ahead now! In my opinion, capturing free energy and utilizing it on site without an extensive public intrastructure is "a no brainer"
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
