Posted by John A. on July 17, 2010 at 16:31:59 from (76.1.122.180):
In Reply to: does size matter? posted by drdarren on July 17, 2010 at 13:15:10:
Guys, Yes,, Size; Weight; Gearbox HP, and Deck thickness does matter. but it is all for nothing If you Do Not Clean Off The deck in the Fall! I looked at perfectly good Bush Hog, 10 ft Rigid deck today! But the two front to back channels that form the back bone of the deck were rotted and hugely pitted,and had collapsed, so the deck is not worth welding on when you take into account it will be better in the long run to find another 10 ft Bush Hog that has been left for junk in some fence row,or get a new deck!, Every other component is in good shape as far as i can tell. except for needing seals and probably new U-joints Neglect can be the biggest enemy of a shredder. I have been pulling an old SR-15M Rhino 3 swing batwing shredder w/ 150 HP gearboxes with a JD 4230. this shredder has eaten and spit out the back more material than it was probably suppose too. As far as real trees are concerned. It is one tough machine. Blade bolts are the weakest link on this machine.The way I run a machine it will be for most. drdarren, IMO....You get what You pay for!!!! what ever line you look at get the highest HP gear boxes and thickest decks possible. I prefer as close as possible 100 ++ hp gearboxes even on a 3 point shredder so there is no way to over horse the gearbox! with Decks to match! In No particular order, JD, Bush Hog, Service-Rhino, Land Pride, Hope this helps! Later, John A.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Hydraulic Basics - Part 2 - by Curtis Von Fange. In the last entry to this series we gave a brief overview of hydraulic system theory, its basic components and how it works. Now lets take a look at some general maintenance tips that will keep our system operating to its fullest potential. The two biggest enemies to a hydraulic system are dirt and water. Dirt can score the insides of cylinders, spool valves and pumps. Wate
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
