Posted by CCall on August 09, 2010 at 15:31:37 from (67.142.173.26):
I am now the proud owner of a Mahindra 3535 4 wheel drive tractor with bucket and with 72 inch finishing mower. 1st tractor I have ever owned- When I bought them the price qouted me was for a Land Pride finishing mower and when the tractor and finishing mower was delivered it was a "bush Hog" brand? the price was the same I just hope bush hog is as good. I love the tractor so far-it has lots of power-easy to use and the finishing mower is doing a great job- Only one thing that kinda concerns me is that the paint is chipping off in one or two places on the tractor and even a couple places on the bush hog gear box. I dont want it to rust out so I will take a wire brush and clean it off to paint the spots where the paint is chipping off. Kinda funny- I know so little about tractors -when I first got it last week I pulled the wheels off the bush hog and adjusted round spacers get a medium cut height- I went to go mow and after a minute I looked back and I was missing a tire on the bush hog? Oh brother -brand new and a tire already came off- well I finally found the spacers, wheel and kotter pin and reassembled everything and it occcured to me that the kotter pin goes in in a way that locks it in place- heeee heeee I was upset at first till I realized this- Oh well- live and learn have a good day all
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
