fairly common around here. I haven't had a whole lot to do with it, but here's what I recall form the guys i've talked to. Two main types of application. Waste sludge is the solids collected and pulled out. the other type is spraying of partially refined waste water through an irrigator, typically from what is called a shafer(sp?) system; mostly water with a fair bit of N in it, and less other stuff.
first off, processed sewage has to have a certain level of testing and meet certain standards. they should be able to tell you nutrient content AND heavy metal content and the nutrient management plan has to be adjusted to compensate. usually, heavy metals are below the EPA threshold anyway.
second thing is the nutrient management plan thats required. its effectively the same thing as a livestock waste management plan that many livestock operators have. it will contain details regarding storage, handling, rate and method to apply. big thing is, it tells, when, where and how much they are putting down. before they do anything, they are supposed to have this written and ready to go. They aren't a huge deal.
long term, you probably are going to have a faster build up of heavy metals, and you'll want to be sure your keeping up with soil testing that shows this. in the short term, it shouldn't be a big deal though. like any nutrient source, you'll be concerned about what is going on, and it is pretty high in P if I recall correctly. Treat it like manure and chances are, they will want to apply it at the nitrogen rate, which means you could start building up your soils P level. if you aren't in the production of direct to market produce, you shouldn't have to worry much about pathogens,
My suggestion would be, go into your local USDA-NRCS office, and ask there. They might not know off hand, its not something we do a lot with, but they can certainly put you in contact with the folks that know the local rules and regs. Around here, aside from the management plan and certain EPA prohibitions near towns, theres not much governing it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
