Posted by Billy Shafer on October 20, 2010 at 16:22:46 from (64.136.27.231):
In Reply to: Re: Welded Hitch posted by mkirsch on October 20, 2010 at 12:02:38:
Rechecked my logs. Only had three tons in the buggy. Hitch is rated at 12000 pounds. The forged ones we now use are rated at twenty thousand pounds. The trucks we use have the hitch main frame welded to the frame of the truck. No bumpers involved.
But regardless of what was or was not the load. I think it would still be a good idea to check any welded hitch. Plus use the safety chains.
Yes they are hard to stop. But we are not allowed to get over 30 MPH. Take the back roads to the plant and still at times have people behind me.
Very friendly people. They wave and talk to you all the time. Just don't understand that one finger wave.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
