Re: Carburetor Cleaning
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Rob on April 27, 1998 at 20:41:28:
In Reply to: Carburetor Cleaning posted by Tom L. on April 25, 1998 at 17:27:32:
: Can someone recommend the best method
: of cleaning a gummed up carburetor without
: removing it from the tractor? Thanks in
: advance. You could try some of the fuel line/injector
additives. But if its really bad, the only good
way is to remove and disassemble (most times the gaskets
are destroyed so get a "basic" kit for gaskets)
and soak in acetone or carb cleaner . Don't poke steel wire down
the jets. this enlarges them, use brass or tooth
piks, but carefully.
Most times
Follow Ups:
Post a Followup
|
