We had a licensed electrician do the work, and the problem stumped him, so he called in his boss to help figure out what was going on. Before we were done, they had called their boss (the owner) to help figure out why the generator breaker kept tripping. They brought their own generator out to try it, and it did the same thing. Apparently, although a GFI on the 110 side is standard, the GFI on the 220 side was relatively new requirement at the time and they were not aware of the GFI on the 220 side. The Generac customer service people didn't even know that their generators had it! My electricians took this problem as a personal challange and spent a lot of time testing, they didn't charge me for the extra time they spent trying to figure it out. All their tests showed that there were no problems with the house service, that the problem had to be the generator, and of course the generator repair shop kept saying that there was no problem with the generator. At the end, I was told that the GFI breaker tripping didn't mean that there was a problem with the house wiring, but that the generator wasn't meant to be plugged into the house service in that manner. Would it have worked if we would have provided the generator with its own ground?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.