Posted by The tractor vet on December 21, 2010 at 05:06:04 from (76.212.235.210):
In Reply to: louisville ford posted by Ray Hudson on December 20, 2010 at 16:32:05:
I learned many years ago to just go to a spring shop when it comes to spring work. around here we have a place called Emich Spring . And they have done all my spring work for over thirty years. They have done my pick ups and my semi's . You can not do the work as fast or as cheap as they can . Took My semi tractor up one day with a broken drive spring and i had then put all four springs on it the total bill was less then 900 bucks and i was in and out in less then and hour . Same as when i took the dump trailer in to have new spring and be rebushed , took the truck and trailer up and they had me pull the whole rig in and never unhooked i got out of the truck and went to the waiting area and got me a Barley pop out of the COKE machine and sat down figuren that i had and hour to kill wrong i was not even half way thru the beer when Bob came out and said your done . Two new springs and rebushed in less then thirty min. less then 450 bucks out the door and back on the road and no busted knuckles or mashed finger. They have the tools and the overhead cranes and the jacks jack stands and porta powers to get the job done fast and wright the first time . They have the springs on hand and every nut bolt and bushing PLUS they had Barley pop on hand .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Listening to Your Tractor - by Curtis Von Fange. Years ago there was a TV show about a talking car. Unless you are from another planet, physically or otherwise, I don’t think our internal combustion buddies will talk and tell us their problems. But, on the other hand, there is a secret language that our mechanical companions readily do speak. It is an interesting form of communication that involves all the senses of the listener. In this series we are going to investigate and learn the basic rudimentary skills of understanding this lingo.
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
