Posted by mkirsch on January 03, 2011 at 05:34:02 from (64.80.108.56):
In Reply to: ice in tires posted by sqwert on January 02, 2011 at 15:12:58:
What do you plan on doing with the tractor in the immediate future?
If you're going to work on it in a heated shop for the rest of the winter, the problem will take care of itself. Let it melt, drain it out, and replace it with something that doesn't freeze.
If you're going to use it immediately, you need to get that water out of there somehow. Whatever it takes to melt the ice, then drain the water.
The way to dump the water is by using the tractor's weight and air pressure.
Put it up on a jack, somewhere you don't care if the water flows.
Pump the tire up to about 25PSI.
Rotate the valve stem to the bottom and remove the valve core. Let'er fly!
When the flow starts to get lackluster, rotate the tire so the valve stem is back on top. Pump 'er back up, and roll the valve stem back to the bottom.
As the water level gets low, you need to squash the tire by letting the tractor's weight down on it. You can get about 95% of the liquid out.
From there you either need to pull the tube and suck it dry, or add a few gallons of antifreeze and leave a little bit of water in there.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Black Tire Paint - by Staff. I have been fortunate in that two of my tractors have had rear tires that were in great shape when I bought the tractor. My model "H" even had the old style fronts with plenty of tread. My "L" fronts were mismatched Sears Guardsman snow tires, which I promptly tossed. Well, although these tires were in good shape as far as tread was concerned, they looked real sad. All were flat, but new tubes fixed that. In addition to years and years of scuffing and fading, they had paint splattered on
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
