Posted by jdemaris on January 09, 2011 at 11:42:29 from (67.142.130.21):
In Reply to: Re: Watch out . . . posted by 135 Fan on January 09, 2011 at 11:11:42:
We didn't require anything like that, but I was never on the money-receiving-end of the counter - so choosing/accepting/rejecting people was not my job.
I'm wondering - just how is somebody supposed to prove he/she has experience or has common sense? I know many who have run heavy-equipment their entire lives and have no paperwork to prove it. A CDL doesn't quallfy somebody to run a dozer. Neither does being a farmer, logger, truck driver, etc. Also no such thing as "licensed contractors" in many rural areas. And even if there was, sometimes a "contractor" is just a person that contracts work out and has no personal experience with running equipment.
Now, if you could make somebody leave a $250,000 cash deposit - you might have some wiggle-room for jerks. But, it's likely the jerks won't have the cash.
I forgot to note one other problem with rentals that we had. Theft. We had several Deere crawlers and two skidders stolen. Somebody would rent for a day with fake ID and never come back. We were missing two, almost new Deere machines for a year. A 450C dozer with winch and a 440C skidder. Ends up they were only 15 miles away the whole time. A logger reported his own worn-out crawler and skidder stolen. Collected insurance. Then sold the stuff, and used the ones he stole from us. I had to go over with the New York BCI investigators to take apart the 450C searching for serial # Deere had hidden (for theft purposes).
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.